Hearing Soft is Inform for Buying and Guidence of Hearing Loss People.and HearingSoft Inform to that Hearing Aids & its Accessories.Hearing aids is a more than 1,000 different models are available in the aroung the world. All of them include a microphone (to pick up sound), amplifier (to boost sound strength), a receiver or speaker (to deliver sound to the ear), and are powered by a battery. Depending on the style, it's possible to add features to filter or block out background noise, minimize feedback, lower sound in noisy settings, or boost power when needed.
Hearing aids are either "m
onaural" (a hearing aid for one ear), or "binaural" (for two ears); more than 65% of all users have binaural aids. Hearing aids are divided into several different types:
* digital
* in-the-ear
* in-the-canal
* behind-the-ear
* on-the-body
Digital aids are sophisticated, very expensive aids that borrow computer technology to allow a person to tailor an aid to a specific hearing loss pattern. Using miniature computer chips, the aids can selectively boost certain frequencies while leaving others alone. This means a person could wear such an aid to a loud party, and screen out unwanted background noise, while tuning in on one-on-one conversations. The aid is programmed by the dealer to conform to the patient's specific hearing loss. Some models can be programmed to allow the wearer to choose different settings depending on the noise of the environment.
In-the-ear aids are lightweight devices whose custom-made housings contain all the components; this device fits into the ear canal with no visible wires or tubes. It's possible to control tone but not volume with these aids, so they are helpful only for people with mild hearing loss. Some people find these aids are easier to put on and take off than behind-the-ear aids. However, because they are custom-fit to a person's ear, it is not possible to try on before ordering. Some people find them uncomfortable in hot weather.
In-the-canal aids fit far into the ear canal, with only a small bit extending into the external ear. The smallest is the MicroCanal, which fits out of sight down next to the eardrum and is removed with a small transparent wire. These are extremely expensive, but they are not visible, offer better acoustics, and are easier to maintain. They can more closely mimic natural sound because of the position of the microphone; this position also cuts down on wind noise. But their small size makes them harder to handle, and their battery is especially small and difficult to insert. Adjusting the volume may be hard, since a person must stick a finger down into the ear to adjust volume, and this very tiny aid doesn't have the power of other, larger, aids.
Behind-the-ear aids include a microphone, amplifier and receiver inside a small curved case worn behind the ear; the case is connected to the earmold by a short plastic tube. The earmold extends into the ear canal. Some models have both tone and volume control, plus a telephone pickup device. However, many users, think them unattractive and out of date; and people who wear glasses find that the glasses interfere with the aid's fit. Others don't have space behind the ear for the mold to fit comfortably. However, they do offer a few advantages.
Behind-the-ear aids:
* don't require as much maintenance
* are easily interchangeable if they need to be serviced
* are more powerful
* are easier to handle than smaller aids
* can provide better sound quality
* tend to be more reliable
Eyeglass models are the same as behind-the-ear devices, except that the case fits into an eyeglass frame instead of resting behind the ears. Not many people buy this type of aid, but those who do believe it's less obvious, although there is a tube that travels from the temple of the glasses to the earmold. But it can be hard to fit this type of aid, and repairs can be problematic. Also, if the aid breaks, the person also loses the benefit of the glasses.
CROS or the crossover system type of hearing aid is often used in conjunction with the eyeglass model. The CROS (contralateral routing of signal) system features a microphone behind the ear that feeds the amplified signal to the better ear, eliminating "head shadow," which occurs when the head blocks sound from the better ear. This type may help make speech easier to understand for people with a high-frequency loss in both ears.
A BI-CROS system uses two microphones (one above each ear) that send signals to a single amplifier. Sound then travels to a single receiver, which transfers it to the better ear via a conventional earmold.
On-the-body aids feature a larger microphone, amplifier, and power supply inside a case carried inside the pocket, or attached to clothing. The receiver attaches directly to the earmold; its power comes through a flexible wire from the amplifier. Although larger than other aids, the on-the-body aids are more powerful and easier to adjust than other devices. While not popular for everyone, they are often used by those with a profound hearing loss, or by very young children. Some people who are almost totally deaf find they need the extra power boost available only from a body aid.
The latest aids on the market may eliminate the amplifier and speaker in favor of a tiny magnet mounted on a silicone disk, similar to a contact lens, which rests right on the eardrum. Called the Earlens, it is designed to be held in place by a thin film of oil. Users wear a wireless microphone, either in the ear or on a necklace, that picks up sounds and converts them into magnetic signals, making the magnet vibrate. As the Earlens vibrates, so does the eardrum, transmitting normal-sounding tones to the middle and inner ears.
Other researchers are bypassing the middle ear completely; they surgically implant a tiny magnet in the inner ear. By attaching a magnet to the round window, they open a second pathway to the inner ear. An electromagnetic coil implanted in bone behind the ear vibrates the implanted magnet. Unlike the Earlens, this magnetic implant would not block the normal hearing pathway.
Hearing aids are either "m
onaural" (a hearing aid for one ear), or "binaural" (for two ears); more than 65% of all users have binaural aids. Hearing aids are divided into several different types:* digital
* in-the-ear
* in-the-canal
* behind-the-ear
* on-the-body
Digital aids are sophisticated, very expensive aids that borrow computer technology to allow a person to tailor an aid to a specific hearing loss pattern. Using miniature computer chips, the aids can selectively boost certain frequencies while leaving others alone. This means a person could wear such an aid to a loud party, and screen out unwanted background noise, while tuning in on one-on-one conversations. The aid is programmed by the dealer to conform to the patient's specific hearing loss. Some models can be programmed to allow the wearer to choose different settings depending on the noise of the environment.
In-the-ear aids are lightweight devices whose custom-made housings contain all the components; this device fits into the ear canal with no visible wires or tubes. It's possible to control tone but not volume with these aids, so they are helpful only for people with mild hearing loss. Some people find these aids are easier to put on and take off than behind-the-ear aids. However, because they are custom-fit to a person's ear, it is not possible to try on before ordering. Some people find them uncomfortable in hot weather.
In-the-canal aids fit far into the ear canal, with only a small bit extending into the external ear. The smallest is the MicroCanal, which fits out of sight down next to the eardrum and is removed with a small transparent wire. These are extremely expensive, but they are not visible, offer better acoustics, and are easier to maintain. They can more closely mimic natural sound because of the position of the microphone; this position also cuts down on wind noise. But their small size makes them harder to handle, and their battery is especially small and difficult to insert. Adjusting the volume may be hard, since a person must stick a finger down into the ear to adjust volume, and this very tiny aid doesn't have the power of other, larger, aids.
Behind-the-ear aids include a microphone, amplifier and receiver inside a small curved case worn behind the ear; the case is connected to the earmold by a short plastic tube. The earmold extends into the ear canal. Some models have both tone and volume control, plus a telephone pickup device. However, many users, think them unattractive and out of date; and people who wear glasses find that the glasses interfere with the aid's fit. Others don't have space behind the ear for the mold to fit comfortably. However, they do offer a few advantages.
Behind-the-ear aids:
* don't require as much maintenance
* are easily interchangeable if they need to be serviced
* are more powerful
* are easier to handle than smaller aids
* can provide better sound quality
* tend to be more reliable
Eyeglass models are the same as behind-the-ear devices, except that the case fits into an eyeglass frame instead of resting behind the ears. Not many people buy this type of aid, but those who do believe it's less obvious, although there is a tube that travels from the temple of the glasses to the earmold. But it can be hard to fit this type of aid, and repairs can be problematic. Also, if the aid breaks, the person also loses the benefit of the glasses.
CROS or the crossover system type of hearing aid is often used in conjunction with the eyeglass model. The CROS (contralateral routing of signal) system features a microphone behind the ear that feeds the amplified signal to the better ear, eliminating "head shadow," which occurs when the head blocks sound from the better ear. This type may help make speech easier to understand for people with a high-frequency loss in both ears.
A BI-CROS system uses two microphones (one above each ear) that send signals to a single amplifier. Sound then travels to a single receiver, which transfers it to the better ear via a conventional earmold.
On-the-body aids feature a larger microphone, amplifier, and power supply inside a case carried inside the pocket, or attached to clothing. The receiver attaches directly to the earmold; its power comes through a flexible wire from the amplifier. Although larger than other aids, the on-the-body aids are more powerful and easier to adjust than other devices. While not popular for everyone, they are often used by those with a profound hearing loss, or by very young children. Some people who are almost totally deaf find they need the extra power boost available only from a body aid.
The latest aids on the market may eliminate the amplifier and speaker in favor of a tiny magnet mounted on a silicone disk, similar to a contact lens, which rests right on the eardrum. Called the Earlens, it is designed to be held in place by a thin film of oil. Users wear a wireless microphone, either in the ear or on a necklace, that picks up sounds and converts them into magnetic signals, making the magnet vibrate. As the Earlens vibrates, so does the eardrum, transmitting normal-sounding tones to the middle and inner ears.
Other researchers are bypassing the middle ear completely; they surgically implant a tiny magnet in the inner ear. By attaching a magnet to the round window, they open a second pathway to the inner ear. An electromagnetic coil implanted in bone behind the ear vibrates the implanted magnet. Unlike the Earlens, this magnetic implant would not block the normal hearing pathway.
